specifications

Category 6 cable shall far exceed IEC 61156-5 and

ANSI/TIA-568-C.2 Category 6 component

standards. The conductors shall be 23 AWG

construction with HDPE insulation. The copper

conductors shall be twisted in pairs, separated by a

cross divider, and all four pairs shall be covered with

an overall foil and CM jacket.

Frequency (MHz)	Impedance (ohm)	Rutrun Lose (>=Db/100m)	Attenuation (<=Db/100m)	NEXT (>=Db/100m)	ELEFEXT (>=Db/100m)	PS NEXT (>=Db/100m)	PS ELFEXT (>=Db/100m)	Impedance	NVP
1	85~115	20.0	2.0	65.3	63.8	62.3	60.8	<=45	68%
4		23.0	4.1	56.3	51.7	53.3	48.7
10		25.0	6.5	50.3	43.8	47.3	40.8
16		25.0	8.2	47.3	39.7	44.2	36.7
20		25.0	9.3	48.5	37.7	42.8	34.7
31.25		23.6	11.6	42.9	33.9	39.9	30.9
62.5		21.5	17.0	38.4	27.8	65.4	24.8
100		20.1	22.0	35.3	23.8	32.3	20.8
*155	82~118	18.8	28.1	32.4	20.2	29.4	17.2
*200		18.0	32.4	30.8	18.0	27.8	15.0
*250	78~122	16.7	41.8	27.9	14.2	24.9	11.2
*350		16.3	44.9	27.1	13.1	24.1	10.1
*400	78~122	15.9	43.0	35.3	15.7	33.7	12.7
*450		15.5	46.3	34.5	14.7	32.5	11.7
*500		15.2	48.9	33.8	13.8	31.8	10.8
*550		14.9	51.8	33.2	12.9	31.2	9.9

Electrical performance:

Certified channel performance in a 4-connector configuration up to

100 meters and exceeds ISO 11801 Class E and ANSI/TIA-568-C.2

Category 6 standards at swept frequencies up to 250 MHz

Certified component performance up to 100 meters and exceeds the

component requirement of IEC 61156-5 and ANSI/TIA-568-C.2 Category 6

component standards at swept frequencies up to 250 MHz

Conductors/ insulators: 23 AWG solid copper insulated with HDPE

Flame rating: UL 1685

PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications

Temperature 0°C to 50°C (32°F to 122°F) during installation

rating: -20°C to 75°C (-4°F to 167°F) during operation

Cable jacket: PVC

Packaging: 305m (1000 ft.)

 

keyfeaturesandbenefits

Descending length cable markings :Easy identification of remaining cable reduces installation

time and cable scrap

Category 6 cable, commonly referred to as Cat 6, is a standardized twisted pair cable for Ethernet and other network physical layers that is backward compatible with the Category 5/5e and Category 3 cable standards. Compared with Cat 5 and Cat 5e, Cat 6 features more stringent specifications for crosstalk and system noise.  The cable standard specifies performance of up to 250 MHz.